*Specifications subject to change.
All trademarks are the trademarks and/or service marks of their respective owners.
Non-Conductive Antenna Pulleys
Our non-conductive pulleys solve the problem of antennas that will not fit in the available space, as is the case with many Amateur Radio and Short Wave listening antennas. We use materials such as Delrin™ and Nylon in place of metal alloys. This prevents unwanted effects on the RF signal and also allows the pulleys to act as insulators.
Our non-conductive pulleys are very helpful where the wire end of the antenna is tied to a counterweight, such as when a tree is used as support. Or if the wire has to change direction and will need to move either in the wind or to be raised and lowered manually.
The RP1
For attachment to non-conducting masts/posts via wood or machine screws
★ Maximum wire diameter 3/16 overall.
★ Easily fits even large insulated antenna wires.
★ Weight 1oz-- great for portable or field operations.
★ Sheave of 1-9/16 dia keeps wire strength efficiency high leading to less breaks.
★ Delrin® sheave has excellent moisture & sunlight resistance plus natural lubricity and high mechanical strength.